APC6A
Low Profile MUX Cable Clamp
| Material | 316 Stainless Steel | |
| Heat Treat | Solution Anneal | |
| Cable or Hose Capacity | Two | |
| Insert | Nitrile | |
| Grip Capacity | 2,300 lb + Pull Test | |
| Torque Requirements | 90 ft/lb -100 ft/lb | |
| Clamp Height | See chart | |
| Base Plate Length | 5 -15/16” | [ 150.8” ] |
| Base Plate Width | 9 - 7/32” | [ 234.2” ] |
| Base Plate Height | 1.25” from OD of auxiliary line | |
| Base Plate Lining | 1/8” Neoprene | |
| Base Plate Variable Sizes | 4.00” to 6.80” | |
| Base Plate U-Bolt Attachment Coating: | Clear Vinyl | |
| Base Plate U-Bolt Size | 1/2” | |
Part Numbers
DRAWING # |
PART # |
QTY |
DESCRIPTION |
1A |
APC6A-01A |
1 |
Side A, MUX Clamp, 316 SS |
1B |
APC6A-01B |
1 |
Side B, MUX Clamp, 316 SS |
2 |
APC6A-02 |
1 |
Clamp Base, 316 SS |
3 |
APC6A-03 |
1 |
Base Pin (Faspin), 316 SS |
4 |
APC6A-04 |
1 |
Compression Bolt |
5 |
APC6A-05 |
1 |
Compression Bolt Nut |
7 |
APC6A-07 |
1 |
Clevis Hinge Pin, 316 SS |
11 |
APC6A-11 |
1 |
Cotter Pin, 316 SS |
12 |
APC6A-12 |
1 |
Cable, Lariat 1/8", 316 SS |
13 |
APC6A-13 |
2 |
Nicopress Sleeve |
22 |
APC6A-22 |
0.5 |
1/8" x 5" Neoprene Gasket |
26 |
|
2 |
U-Bolts - Specify Size- see pg. 41 |
|
|
1 set |
Inserts - Specify Size |
Assembly Drawing
